Welcome to Prime Asphalt! If you are seeking paving services in the Dallas area, be assured you have come to the right place! Prime Asphalt serves the needs of Texans throughout the entire Lone Star State. Regardless of whether your asphalt paving need is a:
• Private driveway
• Parking lot
• Tennis court, or any other residential or commercial endeavor
We'll get the job done! We offer a vast array of paving services. And, our expertise in the paving industry remains 2nd to none!
Prime Asphalt is meticulous about the materials we use for any of our projects, we use only the highest quality components. We demand the strictest quality control standards during every phase of any sized project - from preparation to installation to clean-up.Need Asphalt Paving? Let's Do This!
Asphalt has an excellent, long standing reputation for repelling water. It's inherently flexible and extremely durable regardless of heavy traffic conditions and weather and temperature extremes.
Below, you will find a general overview of what Prime Asphalt offers its Dallas patrons:
Our asphalt-related services include:
Hot Mix Asphalt Concrete (HMAC)
HMAC is produced by mixing a heated asphalt binder to an aggregate at high and controlled temperatures. The paving and compacting is performed while the asphalt is sufficiently hot.
Asphalt Patching and Repair
Proper maintenance of asphalt is important, and patching is performed when the air and ground temperatures are above freezing. We will spot patch for a temporary remedy for potholes or other areas of concern. We will also repair street cuts from utility work.
If needed, we do saw-cutting. And, of course, completely remove any left-over debris. Saw-cut removal and replacement is a highly-effective remedy for asphalt surfaces that have been neglected or for surfaces that have been damaged due to flooding.
If water infiltration is an issue and has compromised the sub-grade, saw-cut repairs are the ideal solution and translate into as enormous savings in the future!
Chip seal is a more cost-effective option compared to black top or concrete. As with asphalt, liquid asphalt (or hot bitumen) is distributed over existing pavement or a compacted road base and rock is evenly spread over the area, then rolled, impacted and sealed.
As a proactive measure, it is imperative that cracks in asphalt are filled every year since this maintenance procedure ensures that the base or sub-base will not lose its strength and structural integrity. Prime Asphalt uses either hot rubber or cold-pour crack filler.
If left untreated, asphalt will naturally deteriorate quickly due to normal wear and tear and weather conditions. Seal coat will guard against any deterioration when applied on a regular basis.
Typically, paved surfaces should be sealed every 2 to 3 years to provide optimal protection. Seal coat works best when the air and pavement temperatures are at least 49 degrees Fahrenheit (or rising) for 4 consecutive hours.
Much like polyurethane enhances and protects wood, seal coat will protect and give your pavement the look of new asphalt, while being affordable!
Emulsifier Sealer/Rejuvenator is designed to penetrate the pavement and supply much needed oils that will be lost due to oxidation and normal road use.
Oil-based coatings cure quickly and rebind the aggregate. Your pavement will be maximally shielded from water and SUV rays. A rich, black coloration will add eye catching aesthetics.
As long as the surface is dry, oil-based Gilsonite can be added at any time, regardless of temperature.
Not everyone prefers black pavement which is why Prime Asphalt offers specialty coatings in 13 earth-tone colors. Whether it is your driveway, a parking lot, a walkway, golf-cart paths, an amusement park or a tennis court, specialty coatings add new life and eye-catching beauty to any paved area.
Grading and Excavation
With Prime Asphalt, you have the convenience of working with only one contractor. Because of this, you can expect the whole procedure to be not only simple, but flow seamlessly.
When we install a road base for a new driveway, finish grading on new construction or clean-up and level after asphalt paving, you have our guarantee the job will meet your exact specifications!
Perhaps you need gravel applied to a roadway or a road cut out or excavation for utilities – if so, Prime Asphalt is only a phone call away!
Recycled or Green Materials
Prime Asphalt cares about the quality of our environment. We offer recycled asphalt – or RAP – which is used extensively throughout the entire US.
RAP is the single most used recycled product in America. It's made from used pavement that has been crushed and still possesses some of the original bituminous asphalt.
RAP can be installed anywhere – from rural roads to oil fields. It offers an impressively-durable, maintenance-free solution for dust problems that can become eliminated once and for all.
Striping can be applied to pavement that is either freshly-paved, seal-coated, saw-cut or patched.
Typically, striping is used in parking lots and adds that finishing touch that is highly-durable.
Give Us A Call!
Whether your paving needs are residential, rural, or commercial, give us a call and one of our experienced team-members will answer your questions right over the phone. We look forward to hearing from you!
Prime Asphalt is fully insured to serve all of Texas.
Prime Asphalt General Services
• Tar & Chip Paving
• Tar & Chip Seal
• Asphalt Services
• Parking Lots
• Gravel Driveways
• Saw Cutting
• Seal Coating
• Lot Striping/Marking
• Retaining Walls
• Concrete Work
Farm & Ranch